HP LaserJet Managed E72500, E77800, E82500, E87600, HP PageWide Enterprise 586 - Fax Installation Guide

7
5
ENEN
Slide the fax PCA to the left (callout 1) to install the port and
the edge of the PCA into the formatter case, as described in the
previous step. Rotate the right edge (callout 2) of the PCA toward
the formatter to install it in the connector on the formatter.
NOTE: Make sure that the fax PCA is fully seated in the connector.
NOTE: For products LJ Managed MFP E77822, E77825, E77830,

E82550, E82560, LJ Managed MFP E87640, E87650, E87660 locate the
plastic support, pn: CC478-40001. Place the pointed end in the hole on
the front-left of the fax card and set the base on the sheet metal.
ENFR




dans le connecteur sur le formateur.
 Assurez-vous que la carte PCA est bien en place
dans le connecteur.
Pour les produits LJ Managed MFP E77822, E77825, E77830,

E82550, E82560, LJ Managed MFP E87640, E87650, E87660, trouvez


ENDE
Schieben Sie das Fax-PCA nach links (1), um den Anschluss und
und die Kante des PCA im Fomatierergehäuse zu installieren, wie
im vorherigen Schritt angegeben. Drehen Sie die rechte Kante
(2) des PCA in Richtung Formatierer, um es am Anschluss des
Formatierers zu installieren.
HINWEIS: Vergewissern Sie sich, dass die Fax-PCA vollständig

HINWEIS: Suchen Sie für die Produkte LJ Managed MFP E77822, E77825,
E77830, LJ Managed MFP E72525, E72530, E72535, LJ Managed MFP
E82540, E82550, E82560, LJ Managed MFP E87640, E87650, E87660
nach der Kunststoffunterlage, Produktnr.: CC478-40001. Positionieren
Sie das spitz zulaufende Ende im Loch vorne links auf der Faxkarte und
setzen Sie die Basis auf das Blech.
ENIT
Far scorrere il PCA del fax (1) verso sinistra per installare la porta
e il bordo del PCA nel contenitore del formatter, come descritto
nel passaggio precedente. Ruotare il bordo destro (2) del PCA
verso il formatter per installarlo nel connettore sul formatter.
NOTA: assicurarsi che il PCA del fax sia completamente inserito
nel connettore.
NOTA: per i prodotti LJ Managed MFP E77822, E77825, E77830,

E82550, E82560, LJ Managed MFP E87640, E87650, E87660 posizionare

appuntita del foro nella parte frontale sinistra della scheda del fax

ENUK










ENVI
ENAR