HP LaserJet Managed MFP E72525, E72530, E72535, E72825, E72830, E72835 - Engine Install Guide



6
9.1
9.4
10.1
10.2
9.2
9.3
10
9
10.3
10.4
Load paper in Tray 2.
NOTE: Paper is used to print conguration sheets as needed (Letter or A4).
Push down on the blue tab in the back of the tray.
At the same time, pinch or squeeze the blue tab in
the front of the tray and slide to adjust to the proper
paper length. Both tabs are spring-loaded and will
lock, once released.
Squeeze the sides of the tab, and then slide to adjust
the paper width.
Load the paper.
NOTE: A4 or Letter paper should be loaded with the
long edge of the paper on the right side of the tray,
as shown.
Initialize the printer.
CAUTION: Do not connect the network cable at this time.
Connect the power cord to the printer and the wall
receptacle (callout 1).
IMPORTANT: Use the printer power switch to turn the
printer power on (callout 2).
Follow the control panel prompts to set the
country/region, language, date, and time settings.
NOTE: Wait 5-10 minutes for the printer to
automatically complete the initialization processes.
Print a conguration page to make sure
that the printer is properly working.
NOTE: Mark the printed page with a “1”
to represent the rst initialization.
TopazOnly_Engine_IG 4languages_.indd 6 3/1/2019 8:23:19 PM