HP LaserJet Managed MFP E72525, E72530, E72535, HP Color LaserJet Managed MFP E78323, E78325, E78330 - User Guide

NOTE: This option is used in domain environments where the administrator congures a shared folder for
each user. If the Save to a personal shared folder feature is congured, users will be required to sign in at the
printer control panel using Windows credentials or LDAP authentication.
1. Select Save to a personal shared folder.
2. In the Retrieve the device user’s home folder using this attribute eld, type the user’s home folder in the
Microsoft Active Directory.
NOTE: Verify that the user knows where this home folder is located on the network.
3. To add a user name subfolder at the end of the folder path, select Create subfolder based on user name.
To restrict the subfolder access to the user who creates the scan job, select Restrict subfolder access to
user.
Select the destination folder permissions
Select one of the following options to set up destination folder permissions.
Option 1: Congure read and write access
To send scanned documents to a folder congured for read and write access, complete the following steps.
NOTE: Send only to folders with read and write access supports folder verication and job notication.
1. If it is not already selected, select Send only to folders with read and write access.
2. To require the printer to verify folder access before starting a scan job, select Verify folder access prior to job
start.
NOTE: Scan jobs can complete more quickly if Verify folder access prior to job start is not selected;
however, if the folder is unavailable, the scan job will fail.
3. Click Next.
Option 2: Congure write access only
To send scanned documents to a folder congured for write access only, complete the following steps.
NOTE: Allow sending to folders with write access only does not support folder verication or job notication.
NOTE: If this option is selected, the printer cannot increment the scan lename. It sends the same lename for
all scans.
Select a time-related lename prex or suix for the scan lename, so that each scan is saved as a unique le,
and does not overwrite a previous le. This lename is determined by the information in the File Settings dialog
in the Quick Set Wizard.
1. Select Allow sending to folders with write access only.
2. Click Next.
Dialog three: Notication Settings
Use the Notication Settings dialog to congure when notications will be sent.
Select the destination folder permissions
93