HP LaserJet Managed MFP E72525, E72530, E72535, HP Color LaserJet Managed MFP E78323, E78325, E78330 - User Guide

b. Internal Fax Modem Setup
NOTE: If the Internal Fax Modem Setup menu does not appear in the menu listing, LAN or Internet
fax might be enabled. When LAN or Internet fax is enabled, the analog fax accessory is disabled and
the Internal Fax Modem Setup menu does not display. Only one fax feature, either LAN fax, analog fax,
or Internet fax, can be enabled at a time. To use analog fax when LAN fax is enabled, use the HP
Embedded Web Server to disable LAN fax.
3. Select the location from the list on the right side of the screen, and then select Next.
4. Touch the Company Name text eld, and use the keypad to type the company name.
5. Touch the Fax Number text eld, and use the keypad to type the sending fax number. Select Next.
6. Verify that the date and time settings are correct. Make changes as necessary, and then select Next.
7. If a dialing prex is required for sending faxes, touch the Dialing Prex text eld, and use the keypad to enter
the number.
8. Review all the information on the left pane, and then select Finish to complete the fax setup.
Change fax
congurations
Change or update fax settings.
NOTE: The settings congured using the control panel override any settings made in the HP Embedded Web
Server.
Fax dialing settings
Use the following steps to change the fax dialing settings.
1. From the Home screen on the printer control panel, navigate to the Settings application, and then select the
Settings icon.
2. Open the following menus:
a. Fax
b. Fax Send Settings
c. Fax Dialing Settings
3. Congure any of the following settings, and then select Done.
Table 7-1
Fax dialing settings
Menu item Description
Redial on Error The Redial on Error feature sets the number of times a fax number will be redialed
when an error occurs during a fax transmission.
Redial on No Answer The Redial on No Answer setting selects the number of times the fax accessory redials
if the number dialed does not answer. The number of retries is either 0 to 1 (used in
the U.S.) or 0 to 2, depending on the location setting. The interval between retries is set
by the Redial Interval setting.
Redial on Busy The Redial on Busy setting selects the number of times (0 through 9) the fax accessory
redials a number when the number is busy. The interval between retries is set by the
Redial Interval setting.
120 Chapter 7 Fax