HP LaserJet Managed MFP E72525, E72530, E72535, HP Color LaserJet Managed MFP E78323, E78325, E78330 - User Guide

Solve wired network problems
Contact your managed service representative. Make sure that you know your product model number, which
appears on the product label on the back of the printer.
Solve wireless network problems
Contact your managed service representative. Make sure that you know your product model number, which
appears on the product label on the back of the printer.
Solve fax problems
Use the following sections to solve issues involving the printer fax functions.
Checklist for solving fax problems
Use the following checklist to help identify the cause of any fax-related problems you encounter:
● Are you using the fax cable supplied with the fax accessory? This fax accessory has been tested with the
supplied fax cable to meet RJ11 and functional specications. Do not substitute another fax cable; the
analog-fax accessory requires an analog-fax cable. It also requires an analog phone connection.
● Is the fax/phone line connector seated in the outlet on the fax accessory? Make sure that the phone jack is
correctly seated in the outlet. Insert the connector into the outlet until it "clicks."
NOTE: Verify that the phone jack is connected to the fax port rather than to the network port. The ports
are similar.
● Is the phone wall jack working properly? Verify that a dial tone exists by attaching a phone to the wall jack.
Can you hear a dial tone, and can you make or receive a phone call?
What type of phone line are you using?
Verify the type of phone line you are using, and review the recommendations for that type of line.
● Dedicated line: A standard analog fax/phone line assigned to receive or send faxes.
NOTE: The phone line should be for printer fax use only and not shared with other types of telephone
devices. Examples include alarm systems that use the phone line for notications to a monitoring
company.
● PBX system: A business-environment phone system. Standard home phones and the fax accessory use an
analog phone signal. Some PBX systems are digital and might not be compatible with the fax accessory.
You might need an interfacing Analog Telephone Adapter (ATA) to connect the fax machine to digital PBX
systems.
● Roll-over lines: A phone system feature where a new call "rolls over" to the next available line when the rst
incoming line is busy. Try attaching the printer to the rst incoming phone line. The fax accessory answers
the phone after it rings the number of times set in the rings-to-answer setting.
Solve wired network problems
175