HP MFP Analog Fax Accessory 700 - Fax Guide

Operational / Disabled

The fax accessory is installed, but you have not congured the

required fax settings yet.

The fax accessory is installed and operational; however, the

HP Digital Sending utility has either disabled the printer fax feature

or has enabled LAN fax. When LAN fax is enabled, the analog fax

feature is disabled. Only one fax feature, either LAN fax or analog

fax, can be enabled at a time.

NOTE: If LAN fax is enabled, the Fax feature is unavailable on the

printer control panel.

Non-Operational / Enabled/Disabled

The printer has detected a rmware failure. Upgrade the rmware.

Damaged / Enabled/Disabled

The fax accessory has failed. Reseat the fax accessory card and

check for bent pins. If the status is still DAMAGED, replace the

analog fax accessory card.

ENABLED indicates that the analog fax accessory is enabled and turned on; DISABLED indicates that LAN fax is enabled (analog fax is

turned o).

24 Chapter 7 Solve fax problems ENWW