HP MFP Analog Fax Accessory 700 - Fax Guide

2 Install the fax accessory
●
Install the fax accessory
●
Connect the fax accessory to a phone line
●
Verify fax operation
●
Update rmware
Install the fax accessory
If the fax accessory is not yet installed on your printer, see the installation guide in the box for instructions on
installing it.
CAUTION:
Always touch the printer’s chassis (sheet metal) to discharge any ESD charges before touching
the ESD sensitive components during installation.
If the product came with the fax accessory installed, remove the fax connection cover, and then continue on to
the next step to connect the fax accessory to a phone line. The fax connection cover is located on the phone
connector on the formatter rear panel.
NOTE: The following image is shown for illustration purposes only. Formatter location and appearance vary
among printers.
ENWW Install the fax accessory 3