HP MFP Analog Fax Accessory - Warranty and Legal Guide

Pernyataan Telecom (faks)
Pernyataan Tentang Kabel Faks
Kabel faks mungkin disertakan atau tidak disertakan dengan produk. Jika tidak tersedia untuk mengurangi risiko
kebakaran, gunakan hanya kabel saluran telekomunikasi AWG No. 26 atau lebih besar.
Pernyataan UE bagi Operasi Telekomunikasi
Printer ini memenuhi Petunjuk UE yang berlaku dan memiliki tanda CE. Untuk perincian, lihat Pernyataan
Kesesuaian UE yang dikeluarkan oleh pabrikan di bagian lain dalam manual ini.
Untuk printer dengan tur yang akan disambungkan ke Public Switched Telecommunication Network (PSTN)
analog:
Karena ada perbedaan antara setiap PSTN negara di Eropa, produk tidak dapat memberikan jaminan tanpa
syarat atas keberhasilan pengoperasian pada tiap titik pemutusan PSTN. Kompatibilitas jaringan tergantung
pada pengaturan yang benar yang dipilih oleh pelanggan saat menyiapkan koneksi ke PSTN. Ikuti petunjuk yang
diberikan dalam panduan pengguna. Jika Anda mengalami masalah kompatibilitas jaringan, hubungi pemasok
peralatan Anda atau pusat bantuan HP Inc. di negara/kawasan pengoperasian. Menyambungkan ke titik
pemutusan PSTN mungkin tunduk pada ketentuan tambahan yang ditetapkan oleh operator PSTN setempat.
New Zealand Telecom Statements
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the
item complies with minimum conditions for connection to its network. It indicates no endorsement of the
product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item
will work correctly in all respects with another item of Telepermitted equipment of a dierent make or model, nor
does it imply that any product is compatible with all of Telecom’s network services.
This equipment may not provide for the eective hand-over of a call to another device connected to the same
line.
This equipment shall not be set up to make automatic calls to the Telecom “111” Emergency Service.
This product has not been tested to ensure compatibility with the FaxAbility distinctive ring service for New
Zealand.
Additional FCC statement for telecom products (US)
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the back
of this equipment is a label that contains, among other information, a product identier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
The REN is used to determine the quantity of devices, which may be connected to the telephone line. Excessive
RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not
all, areas, the sum of the RENs should not exceed ve (5.0). To be certain of the number of devices that may be
connected to the line, as determined by the total RENs, contact the telephone company to determine the
maximum REN for the calling area.
This equipment uses the following USOC jacks: RJ11C.
An FCC-compliant telephone cord and modular plug is provided with this equipment. This equipment is designed
to be connected to the telephone network or premises wiring using a compatible modular jack, which is Part 68
compliant. This equipment cannot be used on telephone company-provided coin service. Connection to Party
Line Service is subject to state taris.
IDWW Pernyataan Telecom (faks) 33