HP MFP Analog Fax Accessory - Warranty and legal note

Δηλώσεις τηλεπικοινωνίας (φαξ)
Δήλωση για το καλώδιο φαξ
Στο προϊόν ενδέχεται να περιλαμβάνεται καλώδιο φαξ. Σε περίπτωση που δεν περιλαμβάνεται, για τη μείωση
του κινδύνου πυρκαγιάς, χρησιμοποιείτε μόνο καλώδιο γραμμής τηλεπικοινωνιών αρ. 26 AWG ή μεγαλύτερο.
Δήλωση της ΕΕ για τη λειτουργία των τηλεπικοινωνιών
Ο εκτυπωτής πληροί τις ισχύουσες Οδηγίες της ΕΕ και φέρει την ανάλογη σήμανση CE. Για αναλυτικές
πληροφορίες
, ανατρέξτε στη Δήλωση συμμόρφωσης της ΕΕ, η οποία παρέχεται από κατασκευαστή σε κάποια
άλλη ενότητα του παρόντος εγχειριδίου.
Για εκτυπωτές στους οποίους η λειτουργία πρέπει να συνδεθεί με τα αναλογικά δημόσια τηλεφωνικά δίκτυα
μεταγωγής (Public Switched Telephone Network - PSTN):
Λόγω των διαφορών μεταξύ των μεμονωμένων εθνικών δικτύων PSTN σε ευρωπαϊκό επίπεδο, δεν είναι
δυνατή η διασφάλιση ότι το προϊόν θα λειτουργεί επιτυχώς σε κάθε τερματικό σημείο PSTN. Η συμβατότητα
δικτύου εξαρτάται από τη σωστή ρύθμιση από τον πελάτη κατά την προετοιμασία της σύνδεσης με το PSTN.
Ακολουθήστε τις οδηγίες που παρέχονται στο εγχειρίδιο χρήστη. Εάν αντιμετωπίζετε προβλήματα με τη
συμβατότητα του δικτύου, επικοινωνήστε με τον προμηθευτή του εξοπλισμού ή το κέντρο βοήθειας της HP Inc.
χώρα/περιοχή σας. Η σύνδεση με ένα τερματικό σημείο PSTN μπορεί να υπόκειται σε πρόσθετες απαιτήσεις, οι
οποίες καθορίζονται από τον τοπικό πάροχο PSTN.
New Zealand Telecom Statements
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the
item complies with minimum conditions for connection to its network. It indicates no endorsement of the
product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item
will work correctly in all respects with another item of Telepermitted equipment of a dierent make or model, nor
does it imply that any product is compatible with all of Telecom’s network services.
This equipment may not provide for the eective hand-over of a call to another device connected to the same
line.
This equipment shall not be set up to make automatic calls to the Telecom “111” Emergency Service.
This product has not been tested to ensure compatibility with the FaxAbility distinctive ring service for New
Zealand.
Additional FCC statement for telecom products (US)
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the back
of this equipment is a label that contains, among other information, a product identier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
The REN is used to determine the quantity of devices, which may be connected to the telephone line. Excessive
RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not
all, areas, the sum of the RENs should not exceed ve (5.0). To be certain of the number of devices that may be
connected to the line, as determined by the total RENs, contact the telephone company to determine the
maximum REN for the calling area.
This equipment uses the following USOC jacks: RJ11C.
An FCC-compliant telephone cord and modular plug is provided with this equipment. This equipment is designed
to be connected to the telephone network or premises wiring using a compatible modular jack, which is Part 68
ELWW Δηλώσεις τηλεπικοινωνίας (φαξ) 33