HP MFP Analog Fax Accessory - Warranty Guide and Legal Guide

Erklæringer vedrørende telecom (fax)
Erklæring om faxkabel
Der leveres muligvis et faxkabel med produktet, men det garanteres ikke. Hvis det ikke medfølger, bør der, for at
undgå brandrisiko, kun bruges et 26 AWG eller større telekommunikationskabel.
EU-erklæring om telekommunikationsdrift
Printeren overholder gældende EU-direktiver og bærer CE-mærket. Få oplysninger om EU-
overensstemmelseserklæringen udstedt af producenten i et andet afsnit af denne vejledning.
Printere med en funktion, der tillader forbindelse til det analoge PSTN-netværk (Public Switched
Telecommunication Network):
På grund af forskellene mellem individuelle nationale PSTN-netværk i Europa kan produktet ikke garantere
ubetinget vellykket drift på alle PSTN-termineringspunkter. Netværkskompatibilitet afhænger af, at kunden
vælger den korrekte opsætning ved tilslutning til det pågældende PSTN-netværk. Følg anvisningerne i
brugervejledningen. Hvis du oplever problemer med netværkskompatibilitet, skal du kontakte leverandøren af
udstyret eller HP Inc.-helpdesken i det land/område, hvor udstyret anvendes. Tilslutning til et PSTN-
termineringspunkt kan være underlagt yderligere krav fra den lokale PSTN-udbyder.
New Zealand Telecom Statements
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the
item complies with minimum conditions for connection to its network. It indicates no endorsement of the
product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item
will work correctly in all respects with another item of Telepermitted equipment of a dierent make or model, nor
does it imply that any product is compatible with all of Telecom’s network services.
This equipment may not provide for the eective hand-over of a call to another device connected to the same
line.
This equipment shall not be set up to make automatic calls to the Telecom “111” Emergency Service.
This product has not been tested to ensure compatibility with the FaxAbility distinctive ring service for New
Zealand.
Additional FCC statement for telecom products (US)
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the back
of this equipment is a label that contains, among other information, a product identier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
The REN is used to determine the quantity of devices, which may be connected to the telephone line. Excessive
RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not
all, areas, the sum of the RENs should not exceed ve (5.0). To be certain of the number of devices that may be
connected to the line, as determined by the total RENs, contact the telephone company to determine the
maximum REN for the calling area.
This equipment uses the following USOC jacks: RJ11C.
An FCC-compliant telephone cord and modular plug is provided with this equipment. This equipment is designed
to be connected to the telephone network or premises wiring using a compatible modular jack, which is Part 68
compliant. This equipment cannot be used on telephone company-provided coin service. Connection to Party
Line Service is subject to state taris.
DAWW Erklæringer vedrørende telecom (fax) 31