HP LaserJet Managed MFP E72525, E72530, E72535, E77822, E77825, E77830 - On-Site Installation Guide
Operational clearance space requirements
Make sure the printer is installed in an area with enough space around the device for proper service access and
ventilation. The ADF or Flow ADF when fully opened requires 20 inches (508 mm) above the level of the top. The
back of copier and wall needs proper ventilation.
The following space must be provided around the machine to assure machine performance and proper
operations. If any option is installed, provide the additional space for installing it.
NOTE: HP recommends that 18 inches (457.2 mm) be added to the printer sides and front to make sure there
is suicient space to open doors and covers.
●
Rear clearance space: 18 inches (457.2 mm)
●
Left clearance space: 18 inches (457.2 mm)
●
Right clearance space: 18 inches (457.2 mm)
ENWW Operational clearance space requirements 25