HP LaserJet Managed MFP E72525, E72530, E72535, E77822, E77825, E77830 - On-Site Installation Guide

Unboxing and basic assembly
Installation of the HP Color LaserJet MFP E778 Products and the Y1F97A HP Laser Jet Dual Cassette feeder
Click here to view a video of this procedure.
Installation of the HP LaserJet MFP E725 Products the Y1F97A Dual Cassette Feeder and the Y1G24A HP
LaserJet Spacer.
Click here to view a video of the this procedure.
HP Color LaserJet E77822, E77825, E77830 or HP LaserJet E72525, E72530, E72535 engine
1. Open the box, then remove the packing materials or accessories packed on top of the engine.
2. Lift the box from the engine, then pull down the plastic bag around the engine.
HP LaserJet Dual Cassette Workgroup Feeder (DCF) and HP LaserJet Workgroup Cabinet or 2000 sheet HCI
1. Open the box, and then remove all accessories, manuals, and packing materials on top of the DCF/Cabinet
or 2000 sheet HCI.
CAUTION: The DCF/Cabinet or 2000 sheet HCI requires two people to lift.
2. Tilt the shipping box on its side, and then carefully remove the DCF/Cabinet or 2000 sheet HCI from the box.
3. Remove the DCF/Cabinet or 2000 sheet eHCI from its shipping bag, and then remove all tape and packing
materials from the exterior of the DCF and the trays.
IMPORTANT: Three alignment pins are included with the cabinet. Retain these for installing to the engine.
HP Spacer for HP LaserJet E72525, E72530, E72535 models only
▲
Unpack the spacer.
x 2
x 2
HP Job Separator
▲
Unpack the job separator.
ENWW Unboxing and basic assembly 31