HP LaserJet Managed MFP E72525, E72530, E72535, E77822, E77825, E77830 - On-Site Installation Guide

NOTE: Some parts may be buried in the packing foam.
x 2
Installation of the HP Second Exit and Finisher Bridge on the HP LaserJet MFP E7 Products
▲
Unpack the second exit.
Click here to view a video of this procedure.
x 2
Installation of the Y1G22A HP LaserJet Paper Tray Heaters Accessory
▲
Verify the contents of the heaters, and then leave them boxed for the service technician or installer.
Click here to view a video of this procedure.
Installation of the Y1G00A HP LaserJet Inner Finisher on the HP LaserJet MFP E725 and E778 Color products
▲
Click here to view a video of this procedure.
Installation of the Inner Punch on the Y1G00A HP LaserJet Finisher
▲
Click here to view a video of this procedure.
Engine Preparation
For HP Color LaserJet E77822, E77825, E77830: Click here to view a video of this procedure..
For HP LaserJet E72525, E72530, E72535 Click here to view a video of this procedure.
CAUTION: The engine assembly is heavy and requires four people to lift.
32 Chapter 5 Staging ENWW