HP LaserJet Managed MFP E72525, E72530, E72535, E77822, E77825, E77830 - On-Site Installation Guide

1. Remove the packaging, such as foam and plastic.
2. Leave the tape on the engine intact.
Stacking –Refer to installation videos above to view this procedure
Click here to view a video of this procedure.
HP Color LaserJet MFP E77822, E77825, E77830 and HP LaserJet MFP E72525, E72530, E72535
CAUTION: The engine assembly is heavy and requires four people to lift.
Stacking the engine on the DCF/Cabinet or 2000 sheet HCI
1. Install alignment pins on the cabinet prior to placing engine on the cabinet.
2. Open two lift bars on the right-side of the printer.
3. Carefully lift the engine assembly from each corner, align the engine to the locator pins and connector on
the DCF or 2000 sheet HCI, and then carefully lower the engine onto the DCF or 2000 sheet HCI.
4. Remove the scanner lock screw.
CAUTION: The scanner lock screw must be removed prior to powering on the printer.
ENWW Unboxing and basic assembly 33