HP LaserJet Managed MFP E72525, E72530, E72535, E77822, E77825, E77830 - On-Site Installation Guide

2. Remove the toner collection unit (TCU) by releasing tabs on both sides of the TCU (callout 1), and then
remove TCU in the direction of the arrow (callout 2).
1
1
2
3. Pull caps from both sides in the direction of the arrows.
a. Remove packing material from the imaging unit by pulling in the direction of the arrow. Lift o the
imaging unit.
b. Remove adhesive tape by lifting up and pulling o in the direction of the arrow.
c. Remove packing material up and o the device in the direction of the arrow. Pull red arrow label in the
direction of the arrow.
CAUTION: Be careful not to tear the red label.
ENWW Initial power on 43