HP LaserJet Managed MFP E72525, E72530, E72535, E77822, E77825, E77830 - On-Site Installation Guide

Repack (from customer site)
Local move
Table 5-4 Transportation preparation
❑
Power down and disconnect all nishing devices.
❑
Separate the engine and input/output devices.
❑
For long distance transportation, reinstall the ADF scanner lock screw.
❑
Leave the attachment brackets in place.
❑
Retract stabilizer feet on bottom of the units for move.
❑
Protect the casters.
❑
Reinstall the shipping lock on the Booklet Finisher.
❑
HP recommends placing the nishers on pallet for transportation.
❑
Arrange for local shipping.
❑
Verify truck shipment requirements.
❑
Verify securing requirements.
❑
Blanket wrap the engines and make sure they are properly strapped to the truck.
❑
Whenever rolling over any rough surface (asphalt, cobble stones, and other rough surface) lay down 4 x 8 sheets of 1/4 in hardboard.
❑
When transporting across gaps use appropriate support devices to make sure the transportation of the printer is smooth.
Long distance move
Table
5-5 Long distance move
❑
Air freight
❑
Long distance truck shipment
❑
Power down and disconnect all nishing devices.
❑
Separate the engine and input/output devices.
❑
For long distance transportation, reinstall the ADF scanner lock screw.
❑
Leave the attachment brackets in place.
❑
Retract stabilizer feet on bottom of the units for move.
❑
Protect the casters.
❑
Reinstall the shipping lock on the Booklet Finisher.
❑
HP recommends placing the nishers on pallet for transportation.
❑
For long distance transportation, HP recommends crating the printers and accessories or using pallets with heavy padding.
❑
Arrange for long distance shipping.
❑
Verify truck shipment or air freight requirements.
❑
Verify securing requirements.
52 Chapter 5 Staging ENWW