HP LaserJet Managed MFP E72525, E72530, E72535, E77822, E77825, E77830 - On-Site Installation Guide
3. Select the appropriate ‘XA3” bar code label that accurately corresponds with the pre-determinded engine
speed listed on the conguration page.
4. Remove and then discard the barcode axed inside front cover.
5. Select the appropriate model nameplate that accurately corresponds with the pre-determined engine
speed listed on the conguration page.
6. Install the model number nameplate on the front door of the device (snaps into place).
ENWW LPDC installation steps 59