HP LaserJet Managed MFP E72525, E72530, E72535, E77822, E77825, E77830 - On-Site Installation Guide

Adjusting the ADF Skew
Adjusting the ow ADF and ADF Skew
1. Open the ADF. Loosen the two screws securing both hinges.
Figure 7-11 Open ADF and loosen screws
2. Adjust the position of the ADF hinge according to the skew status.
Figure 7-12 Adjust ADF hinge
a. If the skew image is similar to the following example, adjust the hinge unit in the direction of the
arrow. (1 scale = >1.0 mm skew adjustment)
70 Chapter 7 On-site nal setup ENWW