HP LaserJet Managed MFP E72525, E72530, E72535, E77822, E77825, E77830 - On-Site Installation Guide

Figure 7-13 Adjust hinge
b. If the skew image is like the following example, adjust the hinge unit in the direction of the arrow. (1
scale = >1.0 mm skew adjustment)
Figure 7-14 Adjust hinge
3. Detach the ADF sponge after adjusting the skew. Place the ADF sponge on the scanner glass. Close the ADF
unit to attach the sponge.
Check the vertical gap between engine and nisher
Check the vertical gap between the nisher and engine. If the space is not equal at top and bottom, adjust the
casters on the nisher to make the gap even.
ENWW Check the vertical gap between engine and nisher 71