HP LaserJet Managed MFP E72525, E72530, E72535, E77822, E77825, E77830 - On-Site Installation Guide

Table 8-6 On-site nal setup 2nd exit and bridge (continued)
❑
Note the alignment pin on the right side of the bridge. It engages with a hole on the left side of the power button cover.
❑
Slide bridge unit into space below scanner.
❑
Secure the bridge with one screw on the left.
NOTE: In order to test the 2nd exit and the bridge, the nisher must be attached.
ENWW HP LaserJet Second exit and bridge (IPTU) on the HP LaserJet MFP E72525, E72530, E72535 83