HP LaserJet Managed MFP E72525, E72530, E72535, E77822, E77825, E77830 - On-Site Installation Guide

2. Rotate the staple cartridge handle down, and then remove the staple cartridge.
3. Lift two tabs on the staple cartridge, and then lift up to remove the empty staple cartridge from the staple
cartridge carriage assembly.
IMPORTANT: Do not discard the empty staple cartridge carriage. It must be reused with the new staple
cartridge assembly.
Reinstallation tip:
●
Add recycle and unpack step for video purposes here
●
Insert the new staple cartridge in to the staple cartridge carriage.
●
Install the staple cartridge carriage assembly.
NOTE: In order to replace staple cartridge, to remove the staple cartridge from the inner nisher the
staple cartridge must be empty.
90 Chapter 8 Complete installation procedures ENWW