HP Pavilion x360 Convertible PC (model numbers 15-bk100 through 15-bk199 and 15-bk000 through 15-bk099) - Maintenance and Service Guide

Speakers
Description Spare part number
Speakers (includes cables and four isolators) 807535-001
Before removing the speakers, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the keyboard/top cover (see Keyboard/top cover on page 28).
5. Disconnect the battery cable from the system board (see Battery on page 33).
Remove the speakers:
1. Disconnect the speaker cable (1) from the system board.
2. Release the speaker cables from the routing clips (2) and channel built into the base enclosure.
3. Remove the four Phillips PM2.5×5.5 shoulder screws (3) that secure the speakers to the base enclosure.
4. Remove the speakers (4).
NOTE: When removing the speakers, make note of the location of the four rubber isolators (5).
Failure to properly install or damage to these isolators can result in degraded speaker performance.
Reverse this procedure to install the speakers.
34 Chapter 5 Removal and replacement procedures