HP Pavilion x360 Convertible PC (model numbers 15-bk100 through 15-bk199 and 15-bk000 through 15-bk099) - Maintenance and Service Guide

Connector board
Description Spare part number
Connector board (includes cable, memory card reader, USB port, and double-sided adhesive) 807527-001
Before removing the connector board, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the base enclosure (see Keyboard/top cover on page 28).
5. Remove the base enclosure (see Keyboard/top cover on page 28).
6. Disconnect the battery cable from the system board (see Battery on page 33).
Remove the connector board:
1. Release the ZIF connector (1) to which the connector board cable is connected, and then disconnect
the connector board cable from the system board.
2. Detach the connector board cable (2) from the battery. (The connector board cable is attached to
the battery with double-sided adhesive.)
3. Remove the two Phillips PM2.0×3.3 screws (3) that secure the connector board to the base enclosure.
4. Remove the connector board (4).
Reverse this procedure to install the connector board.
Component replacement procedures 39