HP Pavilion x360 Convertible PC (model numbers 15-bk100 through 15-bk199 and 15-bk000 through 15-bk099) - Maintenance and Service Guide

Power connector cable
Description Spare part number
Power connector cable 807522-001
Before removing the power connector cable, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the base enclosure (see Keyboard/top cover on page 28).
5. Disconnect the battery cable from the system board (see Battery on page 33).
6. Disconnect the WLAN module antenna cables from the WLAN module (see WLAN module on page 37).
7. Remove the system board (see System board on page 40).
8. Remove the display assembly (see Display assembly on page 48).
Remove the power connector cable:
1. Remove the Phillips PM2.0×2.3 screw (1) that secures the power connector cable and bracket to
the base enclosure.
2. Remove the power connector cable bracket (2) by lifting it up, and then sliding it to the left.
3. Remove the power connector cable (3) by sliding it to the left.
Reverse this procedure to install the power connector cable.
58 Chapter 5 Removal and replacement procedures