Owner manual

HP Data Vault User's Guide

POWER INDICATOR IS OFF

The server is not powered on.

To power on the server

1. Make sure the power cord is fully plugged into the server and a powered electrical outlet.

2. If plugged into a surge protector or power strip, make sure the device is switched on.

LIGHT-BAR BREATHING AQUA WHITE

A breathing or blinking aqua white light bar indicates that a hard drive has been

installed, but has not been initialized. It occurs in the following conditions:

• When setting up the server for first time—the light-bar is breathing aqua white until the set up on

the first computer is complete.

• The drive has been removed from total storage and the light bar is blinking—for example, when

removing a drive from the drive bay. See Add and Remove Drives from Server Storage

• When adding a new drive the light bar blinks aqua white, before it has been added to server

storage.