Owner manual

Set up and Installation

If you renamed your server during the first software installation, remember to use that server name

instead of hpstorage. A shared folder name is required. The shared folder name cannot contain

spaces; type %20 instead of spaces. Additionally, you cannot connect to a shared folder name that

contains a hyphen.

Connection Method C: Using Connect to Server and the Server's IP Address

The Mac computer may not recognize the server's name in some cases. If that happens, connect to

the server using its IP address instead of the server name. If you are unsure of your server's IP

address, you can log on to your router to see a list of IP addresses for all network connected

devices.

To log on to your router, open an Internet browser window, type the router's IP address in the

address bar and press Enter. The router's IP address will be one of the following,

 192.168.1.1,

 192.168.0.1, or

 Obtain your router's IP address from a Mac by selecting Apple menu > System

Preferences > Network. Select Built-in Ethernet on the left menu. The router IP

address is on the right side of the Network dialog.