User Guide

Power Button

Loading Paper

1. Take o the Top Cover by sliding it slightly forward and away from the Paper Output slot. This will release the

lid and allow you to lift o the Top Cover to insert paper.

Charging Battery and Powering On

1. To charge, insert the micro-USB charging cable into the HP Sprocket Printer.

2. Connect the USB cable to a charging adaptor (not included) and plug into a power outlet.

3. When successfully connected, the LED indicator light will turn red to indicate charging.

4. To charge fully, allow 60-90 minutes, or until the LED changes to green.

5. Turn on your printer by pressing and holding the Power button until the LED indicator turns white.

6. Turn o the printer by pressing and holding the Power button until the white LED indicator goes dark.

• Be aware that continued use during charging will slow down the charging speed.

• If the printer battery is completely depleted, connect the printer to a power source and allow printer to charge for a short period

of time before attempting to power on.

Installing Mobile App

To use your HP Sprocket Printer with your mobile device, you must download the companion HP Sprocket app from the

App Store® or on Google Play™. To download the sprocket app, visit hpsprocket.com/start. There, you will be directed

to the appropriate app store for your device.

• The sprocket app is supported by Android™ devices using OS v4.4 and above and compatible

with iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6,

iPhone 5s, iPhone 5c, iPhone 5, iPod touch (6th generation), iPad Pro (10.5-inch), iPad Pro (9.7-

inch), iPad Pro (12.9-inch) 2nd generation, iPad Pro (12.9-inch) 1st generation, iPad Air 2, iPad

Air, iPad (5th generation), iPad (4th generation), iPad mini 2, iPad mini 3, iPad mini 4.

• You must install the companion sprocket app to operate the HP Sprocket Printer

with your mobile device.

Getting Started