HP Gloss Enhancer Upgrade Kit - User Guide

1 HP Gloss Enhancer Upgrade Kit
This Gloss Enhancer Upgrade Kit has been designed to be used with an HP DesignJet Z9
+
series printer only.
Contents of the kit
Ɣ USB dongle
Ɣ Setup printhead
Ɣ Printhead
Ɣ Gloss enhancer cartridge
Installation
IMPORTANT:
If you perform this upgrade the Ƭrst time you turn on your printer, you will
need only the USB dongle and the gloss enhancer cartridge. You can discard the setup
printhead and keep the printhead provided in this kit in a save place to use in the future.
See
Upgrade at the time of printer initialization on page 1.
If you are not performing the upgrade during the initialization of your printer, you will need
all the components of this kit. See
Upgrade after printer initialization on page 3.
Upgrade at the time of printer initialization
1.
When prompted by the front panel about the gloss enhancer upgrade, insert the USB
dongle into the USB port on the upper side of the front panel, marked with the USB
symbol.
2.
The front panel displays T
This USB drive will upgrade the printer to support gloss
enhancing ink. This action is not reversible.
Tap I
Install
to continue or C
Cancel
to abort.
ENWW
Contents of the kit
1
E
English
Enfocus Software - Customer Support