HP Gloss Enhancer Upgrade Kit - User Guide

Upgrade after printer initialization
1.
Ensure that the printer is turned on and idle.
2.
Ensure that the gray cartridge is not empty, because up to 15 ml of gray ink will be
consumed during the upgrade.
3.
Insert the USB dongle into the USB port on the upper side of the front panel, marked
with the USB symbol. Printer will be restarted during
the process.
4.
When prompted by the front panel, open the right cartridge cover and remove the
cartridge slot protector from the last slot (marked with E).
ENWW
Installation
3
English
Enfocus Software - Customer Support