HP Gloss Enhancer Upgrade Kit - User Guide

5.
Insert the gloss enhancer cartridge provided in this kit, then close the cartridge cover.
6.
When prompted by the front panel, open the printer’s window, then open the
printhead cover.
TIP:
If you are unsure how to open the printhead cover, see the chapter “Handling
ink cartridges and printheads” in your printer’s user guide.
7.
Remove and discard the printhead indicated by the front panel.
8.
Insert the setup printhead provided on this kit into the vacant slot.
9.
Close the printhead carriage cover and then the printer window, and follow the
instructions on the front panel.
10.
When the ink system is ready, the front panel prompts you to open the window and
printhead cover.
4 Chapter 1 HP Gloss Enhancer Upgrade Kit ENWW
E
English
Enfocus Software - Customer Support