Hardware Reference Guide

a. Turn the thin client upside down and locate the two screw holes in the grid on the
bottom of the thin client.
b. Position the stand (1) over the bottom of the thin client and line up the captive screws
in the stand with the screw holes in the thin client.
c. Tighten the captive screws (2) securely.
Attach the stand to the right side of the thin client to use it in the horizontal orientation.
a. Lay the thin client down with the right side up and locate the two screw holes in the
grid on the right side of the thin client.
b. Position the stand (1) over the side of the thin client and line up the captive screws in
the stand with the screw holes in the thin client.
c. Tighten the captive screws (2) securely.
8 Chapter 2 Hardware changes