Manual

b. Disconnect the module cable (2) from the module.
c. Remove the module.
The webcam module is available using spare part number 840965-001.
The microphone module is available using spare part number 840955-001.
7. If it is necessary to replace the thermal board:
a. Disconnect the thermal board cable (1) from the board.
b. Using a at tool, pry the board loose (2), and then remove the board (3) from the display
enclosure. (The thermal board is attached to the display enclosure with double-sided adhesive.)
c. Remove the thermal board.
The thermal board is available using spare part number 840956-001.
8. If it is necessary to replace the display hinges:
a. Remove the three Torx T8M2.5×4.0 screws (1) that secure each display hinge to the display panel.
Component replacement procedures 57