Manual

Speakers
Description Spare part number
Speakers (includes cable) 848233-001
Before removing the speakers, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see Bottom cover on page 29).
5. Disconnect the battery (see Battery on page 31).
Remove the speakers:
1. Disconnect the speaker cable (1) from the system board.
2. Remove the three Phillips PM2.5×5.0 screws (2) that secure the speakers to the base enclosure.
3. Remove the cable from the clips built into the chassis (3), and then remove the speakers (4).
Reverse this procedure to install the speakers.
48 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts