Manual

Hard drive
NOTE: The hard drive spare part kit does not include the hard drive bracket or screws. These components
are included in the Hard Drive Hardware Kit, spare part number 848231-001.
Description Spare part number
Hard drive, 7.0 mm
1-TB, 5400-rpm, 762990-001
500-GB, 5400-rpm, hybrid 8 GB 732000-001
500-GB, 7200-rpm 703267-001
500-GB, 5400-rpm, FIPS 820572-001
500-GB, 7200-rpm, self-encrypting 820573-001
Solid-state drive (SSD)
1-TB, PCIe-3x4, NVMe 848238-001
512-GB, SATA-3, self-encrypting drive (SED), OPAL 2, TLC 848240-001
512-GB, Z Turbo drive, PCIe 848236-001
256-GB, SATA-3, self-encrypting drive (SED), OPAL 2 848237-001
256-GB, Z Turbo drive, PCIe 848235-001
Before removing the hard drive, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see Bottom cover on page 29).
5. Disconnect the battery (see Battery on page 31).
6. Remove the smart card reader (see Smart card reader on page 53).
Remove the hard drive:
1. Disconnect the hard drive cable from the system board (1).
54 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts