Getting Started - Windows Vista

Getting Started 7

What’s Next?

To create a backup using Backup and Restore Center, follow these steps:

✎

Be sure that the computer is connected to AC power before you start the backup

process.

✎

The backup process may take over an hour, depending on file size and the speed of the

computer.

1. Click Start, click All Programs, click Maintenance, and then click Backup and

Restore Center.

2. Follow the on-screen instructions to back up your entire computer (select models only)

or your files.

Recovering

In case of system failure, use the f11 recovery tool to recover your original hard drive image.

✎

The image includes the Windows® operating system and software programs installed at

the factory.

CAUTION: Using f11 completely erases hard drive contents and reformats the hard drive. All

files you have created and any software installed on the computer are permanently removed.

The f11 recovery tool reinstalls the operating system and HP programs and drivers that were

installed at the factory. Software not installed at the factory must be reinstalled. Personal files

must be restored from a backup.

1. If possible, back up all personal files.

2. If possible, check for the presence of the HP Recovery partition. To find the partition,

click Start, and then click Computer.

✎

If the HP Recovery partition has been deleted, you must recover your operating

system and programs using the Windows Vista operating system DVD and the

Driver Recovery disc (both purchased separately). For additional information,

contact customer support. Refer to the “Contacting Customer Support” section

in the back of this guide.

3. Turn on or restart the computer, and then press esc while the “Press the ESC key for

Startup Menu” message is displayed at the bottom of the screen.

4. Press f11 (HP Recovery).

5. Follow the on-screen instructions.

✎

Windows Vista® provides additional recovery tools through the operating system. For

additional information, go to Help and Support.

✎

If you are unable to boot (start up) your computer, you must purchase a Windows Vista

operating system DVD to reboot the computer and repair the operating system. For

additional information, contact customer support. Refer to the “Contacting Customer

Support” section in the back of this guide.