HP G72 Notebook PC - Maintenance and Service Guide

2. Remove four Phillips PM2.5x3 and three Phillips PM2.5x6.5 screws in the battery bay, and
remove ten Phillips PM2.5x6.5 screws on the base enclosure. The top cover screws are
identified by a triangle icon embossed on the base enclosure.
3. Turn the computer display-side up with the front toward you.
4. Open the computer as far as possible.
5. Remove the four Phillips PM2.5×6.0 screw that secures the top cover to the computer.
58 Chapter 4 Removal and replacement procedures ENWW