Software User Manual

6 Troubleshooting NAS Blade

systems that include external

arrays

If your local array is provided with a NAS package, you can conﬁgure the NAS Blade system that

includes an external array. This chapter describes procedures to stop the external array for maintenance

and recover the external array from a failure.

For more information about each procedure, see the following manuals:

• For NAS Blade Manager, see the NAS Blade Manager User's Guide.

• For NAS Sync Image, see the NAS Sync Image User's Guide.

• For Business Copy XP, see the HP StorageWorks Business Copy XP user guide for the

XP12000/XP10000/SVS200.

• For LUN Manager, see the HP StorageWorks LUN Conﬁguration and Security Manager XP user

guide for the XP12000/XP10000/SVS200.

• For Continuous Access XP, see the HP StorageWorks Continuous Access XP user guide for the

XP12000/XP10000/SVS200.

Stopping and restarting external arrays

Figure 61 shows an example of a NAS Blade system conﬁguration that includes an external array. The

procedures to stop the external array for maintenance and restart the external array after maintenance to

restore the NAS Blade system are described below, referring to Figure 61.

External Storage XP user guide

121