Software User Manual

1. Stop the Continuous Access XP and Continuous Access XP Journal copy processing and operation.

2. Stop accessing the remote command device.

3. Delete the remote command device mapping.

4. Change the port block setting from Initiator/External MIX mode to Standard mode.

For the procedure to change the port block setting, see the HP StorageWorks LUN Conﬁguration and

Security Manager XP user guide for the XP12000/XP1000/SVS200.

Restrictions on Initiator/External MIX mode

Restrictions on Initiator/External MIX mode are:

• Restriction

s on High Speed mode are also restrictions on Initiator/External MIX mode. For High

Speed mode t

he restrictions, see the HP StorageWorks LUN Conﬁguration and Security Manager

XP user guid

e for the XP12000/XP1000/SVS200.

• A point-to-point connection is not available.

• You cannot set Initiator/External MIX mode on external ports of the Standard mode that have

already be

en used to map the external LUs. You cannot set Standard mode on the port of the

Initiator/External MIX mode that has already been used to map the remote command device. You

must delete the external volume's mapping, and then change the port mode's setting.

• Using a por

t of the Initiator/External MIX mode, the command device of the external array can

only be recognized by the discovery operation and mapped. Other volumes cannot be recognized

by the discovery operation or mapped using the port of the Initiator/External MIX mode.

136

Remote command devices