Software User Manual

NOTE:
When using the Thunder 9500V subsystem as an external array, the following versions are
recommended. If you use a 9500V subsystem whose version is earlier than the following versions, the
SATA drive's information might not be displayed correctly.
• For Thunder 9530V, Thunder 9520V, Thunder 9570V: version 0658 or later
• ForThunder9580V,Thunder9585V:version1658orlater
Relation btw. ser. nums. in the Dev. list on LU Op. pane & Thunder 9500V
subsys. mod.
When the external array is a Thunder 9500V subsystem, you can identify the subsystem model from the
serial number displayed in the Serial column in the Device list on the LU Operation pane.
Table 14 shows the relationship between serial numbers displayed in the Serial column and subsystem
models.
Table 14 Relationship between serial numbers and subsystem models (Thunder
9500V subsystems)
Displayed serial number Model
D600XXXX 9570V, 9520V
D60JXXXX 9530V
D60HXXXX 9580V, 9585V
NOTE:
In serial numbers, X is an arbitrary number or character.
Relationship between the WWN of the port on the Thunder 9500V subsystem
and the controller
When the external array is a Thunder 9500V subsystem, you can identify the controller (controller 0 or
controller 1) from the port's WWN.
Table 15 shows the relationship between the port's WWN and the controller.
External Storage XP user guide
14 5