Software User Manual

Rel. btw. ser. n
umbs.inDev.listontheLUOp.pane&T-Stor.AMS&T-Stor.
WMS subsys. mods.
When the external array is a TagmaStore AMS or TagmaStore WMS subsystem, you can identify the
subsystem model from the serial number displayed in the Serial column in the Device list on the LU
Operation pane.
Table 18 shows
the relationship between serial numbers displayed in the Serial column and subsystem
models.
Table18Relationbtw.ser.numbs.&subs.mods.(TagmaStoreAMS&TagmaStore
WMS subs.)
Storage subsystem Displayed serial number Model
77XXXXXX
AMS 1000
75XXXXXX
AMS 500
AMS
73XXXXXX
AMS 200
WMS
71XXXXXX
WMS 100
NOTE:
In serial numbers, X is an arbitrary number or character.
Relation btw. the WWN of the port on the TagmaStore AMS or TagmaStore
WMS subsys. and contr.
When the external array is a TagmaStore AMS or TagmaStore WMS subsystem, you can identify the
controller (controller 0 or controller 1) from the port's WWN.
Table 19 shows the relationship between the port's WWN and the controller.
Table 19 Relation btw. ports' WWNs & contrs. (TagmaStore AMS & TagmaStore WMS
subs.)
Model Controller
Port's WWN
Controller 0
XXXXXXXXXXXXXXX0
AMS 200
WMS 100
Controller 1
XXXXXXXXXXXXXXX1
Controller 0
XXXXXXXXXXXXXXX0
XXXXXXXXXXXXXXX1
AMS 500
Controller 1
XXXXXXXXXXXXXXX2
XXXXXXXXXXXXXXX3
Controller 0
XXXXXXXXXXXXXXX0
XXXXXXXXXXXXXXX1
XXXXXXXXXXXXXXX2
XXXXXXXXXXXXXXX3
AMS 1000
Controller 1
XXXXXXXXXXXXXXX4
XXXXXXXXXXXXXXX5
XXXXXXXXXXXXXXX6
XXXXXXXXXXXXXXX7
150
Notes on connecting external arrays