Manual

4. The Description column shows the operation that was run.
The following table shows a list of the codes.
ExplanationDescriptionCode
Initial copy began.DUPLEX START4710
Initial copy completed and pair status changed to SIMPLEX.DUPLEX END4720
Pair split operation began.Split/SUSPOP START4730
Pair split completed and pair status changed to
Split/SUSPOP.
Split/SUSPOP END4740
Pair resync operation began.SP-Pend/TRANS START4750
Resync-R/REVRSY START
Pair resync operation completed and pair status changed
to DUPLEX.
SP-Pend/TRANS END
Resync-R/REVRSY END
4760
The pair was deleted and status changed to SIMPLEX.Deleting/TRANS DELETE4780
The pair was suspended and pair status has changed to
Suspend/SUSPER.
Suspend/SUSPER SUSPEND4790
The copy has terminated abnormally for reasons other than
above.
COPY ABNORMAL END47D0
Initialization processing has begun.INITIALIZE START47E9
Initialization processing has terminated normally.INITIALIZE END47EA
Initialization processing has terminated abnormally.INITIALIZE ENDED ABNORMAL47EB
Related information
• “View Histories window” (page 97)
Maintaining the system
Some maintenance tasks are a response to behavior discovered during system monitoring. Other
tasks are done to keep the system in tune with your changing requirements.
54 Monitoring and maintaining the system