User guide

Cause of errorRAID Manager commandSSB2
The command ended abnormally because there is no additional shared memory
(more than TI 1).
All commands9724
The command ended abnormally because the LDEV number of the volume you
specified as the FS or SS P-VOL is beyond the specified range.
All commands9725
The command ended abnormally because you specified the unmounted volume
as the FS or SS P-VOL.
All commands9726
The command ended abnormally because you specified a blocked volume as
the FS or SS P-VOL.
paircreate, pairsplit,
pairresync, pairresync
-restore
9727
The command ended abnormally because you specified a volume that is in the
process of being formatted as the FS or SS P-VOL.
paircreate, pairsplit,
pairresync, pairresync
-restore
9728
The command ended abnormally because you specified a volume as the FS or
SS P-VOL and that volume has an emulation type other than OPEN-V.
paircreate, pairsplit,
pairresync, pairresync
-restore
9729
You cannot create the FS or SS pair because the volume you specified as the
FS or SS P-VOL has the command device setting.
paircreate972A
You cannot create the FS or SS pair because you have exceeded the allowable
FS P-VOL capacity, which is 4 TB.
paircreate972C
You cannot create the FS or SS pair because you have exceeded the allowable
FS S-VOL capacity, which is 4 TB.
paircreate972E
You cannot create the FS or SS pair because you specified a V-VOL as the FS
or SS P-VOL.
paircreate972F
You cannot create the FS or SS pair because you specified a pool-VOL as the
FS or SS P-VOL.
paircreate9730
You cannot restore the FS or SS pair because the FS or SS P-VOL and Cnt Ac-S
P-VOL share the volume, and the status of the Cnt Ac-S pair is not PSUS or PSUE.
pairresync -restore9731
You cannot restore the FS or SS pair because the FS or SS P-VOL and Cnt Ac-J
P-VOL share the volume, and the status of the Cnt Ac-J pair is not PSUS or PSUE.
pairresync -restore9732
You cannot restore the FS or SS pair because the FS or SS P-VOL and Cnt Ac-S
S-VOL share the volume.
pairresync -restore9733
You cannot restore the FS or SS pair because the FS or SS P-VOL and Cnt Ac-J
S-VOL share the volume.
pairresync -restore9734
You cannot create the FS or SS pair because you specified Cnt Ac-J's journal
volume as the FS or SS P-VOL.
paircreate9735
The command ended abnormally because the LUSE volumes you specified as
the P-VOL and S-VOL do not have the same structure.
paircreate, pairsplit,
pariresync, pairresync -
restore
9736
You cannot create the FS or SS pair because you specified a volume with the
VMA setting as the FS or SS P-VOL.
paircreate973A
The command ended abnormally because the LDEV number of the volume you
specified as the FS or SS S-VOL is beyond the specified range.
All commands973B
The command ended abnormally because you specified an unmounted volume
as the FS or SS S-VOL.
All commands973C
The command ended abnormally because you specified a blocked volume as
the FS or SS S-VOL.
paircreate, pairsplit,
pairresync, pairresync
-restore
973D
Troubleshooting with RAID Manager 75