User guide

Cause of errorRAID Manager commandSSB2
You cannot restore the FS or SS pair for one of the following reasons:pairresync -restore9783
• A snapshot for the FS or SS pair to be restored is being stored per consistency
group.
• The P-VOL of the FS or SS pair to be restored is used as the P-VOL of another
FS or SS pair, and the snapshot data of the latter pair is being stored per
consistency group.
The command ended abnormally because quorum disks are specified as P-VOLs
of FS or SS pairs.
paircreate, pairsplit,
pairresync, pairresync
-restore
9786
The command ended abnormally because quorum disks are specified as S-VOLs
of FS or SS pairs.
paircreate, pairsplit,
pairresync, pairresync
-restore
9787
You cannot create the FS or SS pair using the consistency group number for one
of the following reasons:
paircreate978A
• The specified consistency group number is in use for BC/SS.
• You have reached the maximum number of pairs that you can create for a
consistency group.
• A pair that uses the same P-VOL exists already in the specified consistency
group.
You cannot create the FS or SS pair because the specified consistency group
number is out of the range of the number that you can specify.
paircreate978B
You cannot create the FS or SS pair because the THP V-VOL, which is undergoing
capacity expansion, is specified as the FS or SS P-VOL.
paircreate9790
You cannot create the FS or SS pair because a THP V-VOL that is reclaiming
zero pages is specified as the FS or SS P-VOL.
paircreate9793
The command ended abnormally because a volume without path definition is
specified as the FS or SS P-VOL.
paircreate, pairsplit,
pairresync, pairresync
-restore
9796
The command ended abnormally because a volume without path definition is
specified as the FS or SS S-VOL.
paircreate, pairsplit,
pairresync, pairresync
-restore
9797
If you have already created the maximum number of FS or SS pairs, you cannot
create additional pairs.
paircreate97A1
The command ended abnormally because the volume specified as the P-VOL
uses two mirrors in a 3 Cnt Ac-J data center configuration.
paircreate, pairsplit,
pairresync,
pairresync-restore
97A2
The command ended abnormally because the volume specified as the S-VOL
uses two mirrors in a 3 Cnt Ac-J data center configuration.
paircreate, pairsplit,
pairresync,
pairresync-restore
97A3
You cannot create the FS or SS pair because the THP V-VOL in the initialization
process is specified as the FS or SS P-VOL.
paircreate97A4
The command ended abnormally because the external volume that is mapped
for online data migration is specified as FS or SS P-VOL.
paircreate, pairsplit,
pairresync, pairresync
-restore
97A5
The command ended abnormally because the external volume that is mapped
for online data migration is specified as the FS or SS S-VOL.
paircreate, pairsplit,
pairresync, pairresync
-restore
97A6
You cannot create the pair specified with a consistency group because the
maximum number of the consistency groups are defined.
paircreate97B4
78 RAID Manager command reference