HP Business Notebook Intel® vProTM setup and configuration 2011 Business Notebook Models - Technical white paper

14
Recommended Setting : Network Dependent
This option is used in Enterprise mode when an Intel AMT Setup and Configuration
(Provisioning) Server is available. It points to the IP address of the SCS.
If the IP is left as the default, the ME will look for “ProvisionServer” on DNS. The
default port for many SCS is at 9971.
Some ISV’s may require additional settings, such as the SCS port number and SCS IP
address. Contact your Management Console ISV for more details.
d. Provisioning Server FQDN.
i. Enter Provisioning Server FQDN
Default Setting : None
Recommended Setting : Network Dependent
This option is used in Enterprise mode when an Intel AMT Setup and Configuration
(Provisioning) Server is available. It points to the FQDN (Fully Qualified Domain
Name) of the SCS.
e. Go into TLS PSK.
i. Go into Set PID and PPS.
Default Setting : None
Recommended Setting : System Dependent
This option is for Provisioning ID (PID) and Provisioning Passphrase (PPS)
entry. PIDs are 8 characters and PPS are 32 characters. There are dashes
between every set of four characters so counting dashes PIDs are 9
characters and PPS are 40 characters. They must be generated by an S&CS.
The Admin Password, PID, and PPS can be pre-populated by HP during
manufacturing. Go to the OEM TLS-PSK section for details.
ii. Skip Delete PID and PPS.
This Option deletes the current PID and PPS entries in the system.
iii. Return to previous menu.
f. Skip TLS PKI.
This option is for Remote Configuration (RCFG) also known as Zero Touch
Configuration (ZTC). This option only appears in the Factory or In-Setup phase. Go to
the RCFG Section for more information.
g. Return to previous menu.
15. FW Update Settings
a. Local FW Update.
Default Setting : Enabled