HP Business Notebook Intel® vProTM setup and configuration 2011 Business Notebook Models - Technical white paper

16
This option allows users and passwords to be added from the WebGUI. If it is
disabled, then only the administrator has MEBx remote access.
c. Serial Over LAN
Default Setting : Enabled
Recommended Setting : Enabled
i. Select Enabled.
d. IDE Redirection
Default Setting : Enabled
Recommended Setting : Enabled
i. Select Enabled.
f. Legacy Redirection Mode.
Default Setting : Disabled
Recommended Setting : Disabled
Select Disabled.
This option allows the Redirection feature to work with the pre-AMT 7.0 remote
consoles (need to set to Enabled).
20. Check KVM Configuration.
KVM feature Selection.
Default Setting : Enabled
Recommended Setting : Enabled
21. User Consent
a. User opt-in.
Default Setting : User Consent is required for KVM session
Recommended Setting : User Dependent
b. Opt-in Configuration from remote IT
Default Setting : Enabled Remote Control of KVM Opt-in Policy
Recommended Setting : User Dependent
Disable Remote Control of KVM Opt-in Policy – This option disables the Remote
User’s ability to select User OPT-IN Policy. In this case only the local user can
control the opt-in policy.
Enable Remote Control of KVM Opt-in Policy - Enables Remote User’s ability to
select User OPT-IN Policy
22. Return to MEBx Main menu. And select Exit.
a. Select Y.
This will exit the MEBx Setup and save settings.
23. The system will display an Intel ME Configuration Complete message (only once).