HP Business Notebook Intel® vProTM setup and configuration 2011 Business Notebook Models - Technical white paper

9
Leave as default value and hit Enter
Default Setting : 0.0.0.0
Recommended Setting : Network Dependent
Leave as 0.0.0.0 if this option is not needed.
f. Alternate DNS Address
Leave as default value and hit Enter
Default Setting : 0.0.0.0
Recommended Setting : Network Dependent
g. Wired LAN IPV6 Configuration
Select Enabled option for IPV6IPV6 Feature Selection
If DHCP is disabled, then steps 15b through 15f are required to configure the IPV6 static
IP address
i. IPV6 Interface ID Type
Default Setting : Random ID
Recommended Setting : Random ID
RANDOM ID - The IPV6 Interface ID is automatically generated using a
randomnumber as described in RFC 3041. This is the default.
Intel ID - The IPV6 Interface ID is automatically generated using the MAC address.
Manual ID - The IPV6 Interface ID is configured manually. Selecting this type
requires that the Manual Interface ID is set with a valid value.
ii. IPV6 Address
AMT 7.1 supports IPV6 network interface.
Enter a static IPV6 address
Default Setting : None
Recommended Setting : Network Dependent
Example: 2001:db8::1428:57ab
iii. IPV6 default Router
Enter the IPV6 Default Router address
Default Setting : None
Recommended Setting : Network Dependent
Example: 2001:db8::1428:57ab
iv. Preferred DNS IPV6 Address
Enter the Preferred DNS IPV6 Address
Default Setting : None
Recommended Setting : Network Dependent
Example: 2001:db8::1428:57ab