User Guide

Set up Web Services
Before you set up Web Services, make sure your printer is connected to the Internet using a wireless
connection.
To set up Web Services using the printer control panel
1. On the printer control panel display, from the Home screen, touch ( Setup ).
2. Touch Web Services .
3. Touch Yes to accept the Web Services terms of setup.
4. Touch OK when you see Web Services have been set up successfully.
When the printer is connected to the server, the printer prints an information page, and shows Web
Services Summary on the screen.
To set up Web Services using the embedded web server
1. Open the embedded web server (EWS). For more information, see Open the embedded web server
on page 120.
2. Click the Web Services tab.
3. In the Web Services Settings section, click Setup , click Continue, and follow the onscreen instructions
to accept the terms of use.
NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the on-screen
instructions to set up a proxy server. If you do not have the proxy details, contact your network
administrator or the person who set up the network.
4. When the printer is connected to the server, the printer prints an information page. Follow the
instructions on the information page to nish the setup.
ENWW Set up Web Services 35