User Guide

1 Telephone wall jack
2 Parallel splitter
3 DSL/ADSL lter
4 Telephone
5 DSL/ADSL modem
6 Computer
7
Use a minimum 26 AWG phone cord to connect to the port on the printer.
You might need to connect the phone cord to your country/region adapter.
NOTE: You need to purchase a parallel splitter. A parallel splitter has one RJ-11 port on the front and two
RJ-11 ports on the back. Do not use a 2–line phone splitter, a serial splitter, or a parallel splitter which has two
RJ-11 ports on the front and a plug on the back.
Figure 5-10 Example of a parallel splitter
To set up the printer with a computer DSL/ADSL modem
1. Obtain a DSL lter from your DSL provider.
NOTE: Phones in other parts of the home/oice sharing the same phone number with DSL service
need to be connected to additional DSL lters to avoid noise when making voice calls.
2. Using the phone cord, connect one end to the DSL lter, then connect the other end to the port on
the printer.
NOTE: You might need to connect the phone cord to your country/region adapter.
86 Chapter 5 Fax ENWW