User Manual

●
Do not overload the tray or document feeder.
●
To prevent jams, poor print quality, and other printing problems, avoid loading the following paper in the
tray or document feeder:
–
Multipart forms
–
Media that is damaged, curled, or wrinkled
–
Media with cutouts or perforations
–
Media that is heavily textured, embossed, or does not accept ink well
–
Media that is too lightweight or stretches easily
–
Media that contains staples or clips
Load paper
To load standard paper
1. Pull out the input tray completely with both hands.
NOTE: If there is other paper in the input tray, remove the paper before loading a dierent paper type
or size.
2. Slide the paper guides towards the edges of the tray as far as possible.
●
To slide the paper-width guides, press the button on the left paper-width guide and slide the guide
at the same time.
●
To slide the paper-length guide, press the button on the paper-length guide and slide the guide at
the same time.
ENWW Load paper 13