Memory Module Replacement Instructions

863070-001 3

Replacing the memory module

1. Open both latches of the memory module slot (1), and

then insert the memory module into the slot (2). Push the

module down into the slot, ensuring that the module is

fully inserted and properly seated. Close both latches

(3).

NOTE: Memory modules are notched to prevent

incorrect insertion.

2. Position the access panel on the computer, and then

slide the panel into place (1). Tighten the screw in the

rear of the panel (2).

3. Plug the power cord and any additional cables into the

back of the computer.

4. Press the power button to turn on the computer.

The information contained herein is subject to change without notice. The only warranties for

HP products and services are set forth in the express warranty statements accompanying such

products and services. Nothing herein should be construed as constituting an additional warranty.

HP shall not be liable for technical or editorial errors or omissions contained herein.

First Edition: June 2016

PRI NTER: Repl ac e thi s bo x with Pr int ed- I n (PI )

St at ement(s) as p er sp ec.

NOTE: This box is simply a placeholder. PI

St at ement(s) do n ot ha ve to fit ins id e the b ox

but sh ould be pl aced in t hi s area .